How To Properly Drain the Heating System?
Faced with renovation work, going on a long journey or becoming the victim of an accident, many are wondering why drain cleaning in Los Angeles is necessary from the heating system? In most cases, the answer is yes, although there are situations where you can fix a problem or make repairs with radiators filled with liquid.
Although the draining procedure is not particularly difficult, compliance with the operating rules is an important nuance. If you do not follow the procedure, you can pour water over the floors in your own home. And if the drain cleaning in Los Angeles is carried out in a multi-story building, then neighbors may also suffer from incorrect actions.
Why Do You Need to Drain Water from Heating Systems?
Drain cleaning in Los Angeles of the heating system is necessary in the following cases:
- When it is required to eliminate leaks in pipes
- If old radiators are replaced with more modern models
- When preventive measures are taken to clean the system from accumulated contamination
- If you need to replace the coolant
With filled cavities of batteries and pipes, these works cannot be performed. Water is drain in the event of an emergency. This happens at the moment when the owners of the dwellings intend to leave the premises for a long time.
Features Of the Design of The Drain of The Heating System
The heating system of an apartment building and a private house has significant differences. Heating in cottages occurs through an autonomous system, which includes a boiler, pipelines, valves and radiators directly, and sometimes an installed underfloor heating system.
In multi-story buildings, the main structural elements are the supply and return risers, the internal piping system, shut-off valves, drain valves and the batteries themselves. In this regard, the drainage of water from the heating system will be slightly different for both systems, although the principle of operation is the same.
How To Properly Drain the Heating System?
Having dealt with the main elements of the drain cleaning in Los Angeles, you can proceed to emptying it. How to properly drain the heating system in private and apartment buildings?
- Draining in a private house
For the draining procedure, the owner of the cottage will have to prepare in advance a hose through which the liquid released from the system will flow. One end of the hose is connected to the boiler tap, the other is sent to the most convenient place for the owner of the house, where it is possible to empty the structure without damage (to the ground of the personal plot, the sewer).
Sequence of actions for draining water:
- The boiler turns off, its work stops.
- A hose is put on the boiler return valve (usually the outlet pipe is located on the right side under the boiler), so the emptying is faster. If there is no crane underneath the structure, refer to the autonomous system diagram and find out its location. The return part of the hose is directed to a sewer drain, front garden or a regular bucket.
- They open the valve and wait until the liquid stops flowing out (the pressure in the system decreases during this period), the valve is closed back.
-
After draining, you need to take care of the access of air in the cavity of the structure. To do this, it is necessary to open the so-called crane while drain cleaning in Los Angeles, which is usually located at the highest point of the autonomous system. For example, on a heated towel rail or one of the radiators (if the cottage is two-story, then tap will be on the battery of 2 floors).
- The air will begin to push out the remaining water from the batteries and the boiler, therefore, the drain must be carried out again.
- Now, when there is practically no liquid left in the system, its insignificant residues are “blown out” by opening all taps in the structure, and the next water discharge is carried out.
- Now the end of the hose, attached to the return line pipe, is removed from it and attached to the supply valve.
- The final draining of the liquid from the heating system is carried out. To achieve maximum drainage, it is necessary to install the hose as low as possible in relation to the outlet taps.
However, if the owner of a private house has a warm floor system, then the above scheme will not help him. To discharge liquid from it, you will need to use a special compressor.
-
Drainage in an apartment building
It is more difficult to drain the heating system in a multi-story building in that it is necessary to obtain permission from the local management company to drain the riser. This service is paid, and the date will be set not by the owner of the apartment, but by the housing and communal services, which may cause certain inconveniences.
It is better to plan the repair of the heating system at the end of spring – summer – beginning of autumn, since during the heating period it is possible to drain the liquid only for a few hours and for a high fee.
However, it is possible to replace the battery or carry out minor repairs without emptying the entire heating structure. Most radiators are equipped with valves with which you can block the supply of coolant to a local area during drain cleaning in Los Angeles.
Procedure:
- The tap is closed to shut off the water supply to the radiators.
- Using an adjustable wrench, the plug is removed or, if present, the drain valve is opened. The liquid is drained into a basin or bucket.
- If there are no vents, you will have to disconnect the battery completely and dispose of the coolant through the top.
If more serious repairs are required than the usual replacement of the radiator, then the riser must be drained. This procedure is performed by employees of the management company as follows:
- The valve in the attic or ceiling of the upper floor closes.
- The valve closes in the plinth or basement.
- The plug is removed or the drain taps are opened, the coolant is discharged from the system during drain cleaning in Los Angeles.
As you can see, the procedure for getting rid of the coolant from the system has significant differences for houses of different types.
Draining Water from The Heating System in A Private House
Drainage of water from the heating system is mandatory when carrying out repair work in private or multi-apartment housing. It is quite possible to carry out the operation on your own if the fittings are correctly installed and there is no serious damage.
Why Drain Water from The Heating System
Water from the heating system must be drained in order to carry out repair work and improve the quality of the coolant supply. The main works that require draining the water from the heating system during drain cleaning in Los Angeles are:
- Replacement of plumbing fixtures.
- Repair work, liquidation of leaks.
- Preventive flushing and bleeding of the system.
- Replacing the coolant.
Drainage of water from the heating system may be required due to the replacement of the heating medium
Drain cleaning in Los Angeles in a private house in the absence of the owners for a long time. During this period, no one monitors the boiler, the heating medium does not heat up. The liquid in the pipe’s cools, freezes, expands and can rupture them. If the house has warm floors heated by water, then if they are damaged, repaired or the owners leave, the water must be drained.
System Design Features
The design of the heating system in an apartment building is of two types: two-pipe and one-pipe. The single-pipe system has the main disadvantage – water cooling on the way to the upper floors. Heat is directed from bottom to top under pressure, bypasses all heat loops and flows back through the same pipe.
In a two-pipe heating system, the coolant returns back through the second pipe, and the temperature is kept high when it is supplied to the system throughout the entire route.
Heating systems are also divided into open and closed. In an open system, water comes directly from the heating plant and is distributed through the heating and hot water pipes. Most apartment buildings are arranged according to this type.
In a closed system, water is supplied for heating purposes only. From the heating plant, water is distributed to the heating points, where it is brought to the required temperature before being supplied to residents.
A closed autonomous system is also installed in private houses. The installation of an autonomous closed heating system is carried out with the expectation that any part of it can be turned off and the water drained without damaging the rest.
For this, ball shutoff valves are installed at the inlet and outlet of the radiators. A spare pipe is installed – a bypass. The taps allow you to shut off the coolant supply.
In order for the heating system inside the apartment to be serviced without problems, it must be installed in a certain way. The batteries are placed on a slope so that the water can be drained quickly.
Hope you like this article on Dewaarticle.
