The most suitable soundbar for your TV is one that is easy to install. But, with the multitude of ports and connections, the setup can seem confusing. This guide was put together to make connecting the soundbar simple. Also, it’ll be easy to enable you to go straight to the unit itself.
What is the ideal way of connecting a Soundbar to a TV?
The most impressive way to connect a soundbar to your TV is through the HDMI input.
Not only does it support Dolby Digital technology to provide clear audio, but it’s the one with the lowest-cost cables and is easy to use. If you are looking for the best audio quality you can get, HDMI is the way to take it.
Furthermore, if streaming content that utilizes Dolby Digital Dolby Atmos, DTS:X, or the like, it’s possible that you’ll require the HDMI connection in order to decode the audio that these technologies provide. It’s because other input connections like analog or digital will not be able to provide the crystal clear audio that HDMI ARC is able to.
All of the tests we’ve conducted using multiple soundbars, HDMI, as well as optical digital connections have proved that it’s among the most effective ways of connecting any audio device to a television.
How do you connect your soundbar to a TV using HDMI ARC?
Connecting your best soundbar under 10000 to your television using the correct audio cable is vital for both devices to function perfectly. If your soundbar comes with HDMI audio return channel (audio return channel) capability, it is advisable to consider that option over other options for connectivity. The HW-J450 by Samsung could be an instance of a speaker with this feature.
There is an HDMI port for ARC at the bottom of your speaker. There is an HDMI Arc port on most high-end Dolby Atmos soundbars. It is marked on the majority of soundbars, which means you won’t find it difficult to figure out which one is.
If the HDMI cable that is the right length came with the box when you bought it, It is possible to connect the soundbar with your TV through the HDMI port. But more about this later. If you don’t own the HDMI audio cable, you might require a purchase.
However, this cable happens to be among the most affordable on the market, which means it shouldn’t cost excessively. When you plug it into the device, you have to ensure that it’s snugly fitted so that no technical issues will be a problem.
You must then connect the opposite portion of the cable to connect it with your gadget (your television). The HDMI port located on the rear of the soundbar is known as the in port. The port at the rear of your television is called the “outport.”
Connect your TV to your soundbar. If you own a remote, you will hit the source button, and before selecting D.IN., This will ensure that the connection is successful.
How do you connect to a Soundbar with a television that does not have an HDMI arc (4 alternative options for connecting)
Optical Cable
Like the HDMI cable, The digital optical cable is also included inside the packaging. The majority of soundbars that are top-quality already have it, so it’s unlikely you’ll need to purchase one on your own.
Locate the plug labeled with the appropriate name on the side of your television and connect one side of your cable to “out” and the other end to the digital audio “out.”
It’s time to use another end of your optical digital cable. It will connect it to the music bar’s digital audio “in.” Make sure that you plug the optical cable completely through both ends so that your audio doesn’t suffer a loss in quality. Once you’ve double-checked your connection to the cable, it’s time to turn between the two devices.
When your TV and soundbar are both on, click either the button for source on your remote or end of the bar, and then hit D.IN. This will connect your soundbar to your television using optical audio digitally.
In the end, it’s the best method to connect any other device to your television, and not only your soundbar. If you want to control one source for your gadgets, you could also connect them using An HDMI-connected CEC.
Bluetooth
If you’re worried that cables are dirty for you, it’s possible to connect wirelessly using Bluetooth. It’s a simple method of connecting with no ugly cables cluttering your home arrangement.
There is an awesome benefit of Bluetooth connectivity. It doesn’t have you searching your knees or hands for the right input. This is among the most frustrating fundamentals of any wired arrangement. Mostly, it will happen if the TV stand is located closer than the ground.
Furthermore, you won’t have to verify if there are wires that are included inside the box. This is because Bluetooth is built-in into the device.
Before you can connect the device you have purchased to a television, it is necessary to ensure that it is “discoverable.” This means that if you look for your device among other Bluetooth-enabled devices, it is able to locate it.
Once you’ve completed that once that’s done, you can look for the name of your device on your television. It’s possible that you don’t know the name of the device (or the brand name for the device) in full. However, the majority of the time, it is an item’s model code or the brand name.
After you’ve “discovered” the device no matter it’s a soundbar or a Home Theater System, You can then join the two devices. This is typically done using the device that plays audio. Select the device’s name and wait for pairing to occur.
Do (Need an instruction that is more specific to a particular brand? Learn how to set up iLive soundbars later.)
Auxiliary Cable
As compared to earlier connectivity options, The auxiliary cable is an older method of connecting devices. This is the kind of cable that was used in the days before wireless streaming.
But the only distinction lies in that the second cable makes use of an analog connection instead of a digital one. Connecting your soundbar to your television using an analog cable won’t create the same sound quality. Therefore, we recommend purchasing the most effective speakers wireless so that the audio signal transmissions won’t be disrupted.
However, if this is the method you prefer, you can join the cables to “in” as well as the “out” ports in your TV and soundbar. Be sure to wiggle the cables slightly to ensure that everything is snug. In order to sync the TV with the soundbar, you will need to alter the settings for mode.
Take your remote control, choose “source” at this point, select “source,” and then select AUX mode. After the connection is established, you can have a significantly improved audio experience. It will be better in comparison to the sound that your TV speakers can provide.
If your soundbar does not happen to have a remote on it, you should be able to connect with a universal remote. You’ll need an application that’s compatible with it or have a control panel mounted to the left. It is then possible to select the AUX option from there.
Also Read: Reasons for Hiring VAT consultant
