A stairlift is a mechanical device allowing a person with mobility issues to safely travel inside out. Aging adults or younger people with physical motility challenges can remain in their homes. HOW? Thanks to the availability of stairlifts. It provides older adults with explicitly designed models for:
- Ease of use
- Safety
- Customization to meet specific requirements.
The Burnaby stairlift allows homeowners to travel up and down a flight of stairs safely and comfortably, whether inside their home or outside. Once installed, owners should familiarize themselves with its maintenance.
Like any piece of equipment, stairlifts can foster mechanical issues after some time. What if the one installed in your home is breaking down, uttering unusual sounds, or showing blunder codes? It could be a happy time for investigating typical stairlift issues before mentioning maintenance.
Let’s consider some common stairlift problems!
Check The Key Switch:
It’s always better to start with the basics. Right! If the stairlift doesn’t move, it’s foremost to check whether the switch is in the correct position. Depending upon your stair lift model, your key switch is situated on the top of the undercarriage side or the lower title cover of the seat’s armrest. After finding the key switch:
- Check activity by turning the on/off buttons on the seat arm and on the different control units to guarantee buttons are in the on position.
- Then again, assuming the power supply is sent through a spur, check that the red light is on and wasn’t switched off coincidentally.
- Also remove and reinsert the key, ensuring it’s in the proper position.
Adjust The Swivel Seat:
Every stairlift chair has a standard swivel position. But the chair will not operate if the seat is swiveled towards the landing, and it will constantly alert you to the problem. After each usage, swivel the chair back to its riding position, and the mechanism will lock it in place. An error code will appear if the location is incorrect.
Confirm That You Have Powers:
The majority of stairlifts include indicator lights that show whether or not they are getting electricity. Your elevator isn’t getting any electricity if no lights are lighted or only red light is on. Because stairlifts are regulated and operated by circuits, they should be protected with a surge protector. If your stairlift isn’t working, you can try the following:
- Check whether the power supply of the stairlift is plugged into a working outlet.
- If that’s a switched outlet, ensure the switch is in the on position.
- Reset the outlet of a ground-fault circuit interrupter
- Check to see whether the circuit breaker is being tripped or not.
- Plug a lamp or other small tool into the outlet to detect if it will power something besides the stairlift.
Inoperable Remote Control?
Many stairlifts are equipped with remote control. These let the user move up and down the stairs without being aboard. If the handheld remote is not working, it might need a new battery. Although the remote isn’t working after replacing batteries, it is installed incorrectly. You can take the following steps for the correct installation:
- Open the back of the remote control
- Confirm that the batteries are correctly installed
- If it seems necessary, then replace the batteries
How To Maintain A Regular Stairlift?
As an owner, you are solely responsible for inspecting and maintaining your stairlift. Nobody else will do it for you. Also every lift offers a manual with detailed information about the moving parts and batteries.
- Clean The Lift Track: Start by deactivating the device, extracting the key, and examining the track for any debris or blockages. Wipe the track with a duster or moist towel at least once a week.
- Inspect Moving Parts: Check for loose moving elements, such as the cable, locking mechanism, swivel seat, arms, and footrest. Examine the connections, screws, and bolts to see if they need to be tightened.
- Lubricate The Track: Grease the track with appropriate lubricants once every three months to avoid problems with movement degradation. Lubrication is required for a track that grinds or rubs loudly in order to protect the metal and wheels.
- Wheels: Squeaky or grinding wheels indicate that they are fractured and do not rotate freely. Inspect the wheels on a regular basis for any symptoms of wear and tear.
- Batteries: Ensure charging the batteries entirely and keep the charger in a safe and dry location. Mostly, the battery may last up to one or two years before replacement.
Count On Professionals?
YES! You can. We are a trusted resource for providing quality equipment to our customers. We offer built settings and premium models for stairlifts vertical platform Burnaby with standard warranty options. In case you need our help, you can count on us.
We hope this guide will be helpful to keep an overall check on your stairlifts with ease. Explore and see how these devices can help climb the stairs safely for you or your loved one.
Maintenance is the key; use it for its purpose!