Orbi RBK30 – A Tri-Band whole Home Mesh WIFI

The Orbi to the Wi-Fi Mesh Networking system with RBK30 AC3000 is the latest addition to Netgear’s line of Mesh Router. You can easily connect it to the original Netgear Orbi High-Performance, Tri-Band AC3000 Wi-Fi System, such as RBK50 and the AC2200, RBK40. It covers up to 3500 square feet with a router and a wall plug satellite. You can have a quick setup as there is no need to create a new account, download the Orbi app, plug in the satellite, and follow in-app prompts to login to the web interface of your router. The LED on your router, like Orbi blinking white & Orbi flashing white, solid Orbi blue light, blinking orange, and Orbi pink light gives information about different states of your router. So you need to understand the LED behaviour also. For more information on the LED behaviour of your Orbi router, go to the blog section of this page.

Orbi RBK 30 install and Setup

• Unbox your new Netgear Orbi RBK30 router and the satellite.
• Unplug the existing modem and turn it off.
• Connect your Netgear Orbilogin device and the modem using the Ethernet cable.
• The two devices will connect through their WAN ports.
• Now, attach a power adapter with your router’s power slot.
• The power slot is at the back of your router.
• Then, insert the power adapter into the power source of your home.
• Do not turn on the router until you connect a computer to it.
• Take the second Ethernet cable and insert the computer with your RBK 30 Mesh router’s LAN port.
• The other mouth of this Ethernet cable will go into the LAN slot of the computer.
• Now connect the computer to the power slot.

Supply power to the connected Orbi devices 

• To turn on the devices connected using an Ethernet cable, press the power button.
• After pressing the power button, switch on the power outlet.
• The router LED will turn solid white, indicating that the router is ready to use.
• If you see Orbi flashing white, press the power button once again.
• Then turn on the modem connecting back its power line adapters.
• Also, insert the backup batteries if required, or the modem has.
• Now turn on the computer and connect it to the available internet connection to perform further configuration.
• Orbi flashing white light on your modem indicates that power is weak. Remove and then re-insert the power adapter.
• If you see Orbi Pink light on your router, update its firmware and then login.
• If you see solid Orbi blue light on your Orbi RBK30 router, then it is in good condition.

Orbi RBK 30 login to access the User interface page

1. Through the computer connected to the router, open a search engine.
2. And then, head it over to Orbilogin.com or orbilogin.net through its Addy.
3. The orbilogin will provide you with an authenticated login window.
4. Complete the required authentication using admin as the username; and password as the password.
5. As you complete the login requirements, the Basic home page of your RBK30 will appear on the screen.
6. You need to connect or synchronize the RBS30 satellite to the router.

Synchronize the RBK30 with RBK30 satellite

1. Plug the RBS 30 satellite into the wall outlet of your home.
2. Place the satellite near the router to get it synchronized easily.
3. Turn the power of your RBS 30 satellite. Check the LED status.
4. If you see Orbi blue light is flashing on your RBS30 satellite, it is powering up.
5. Press the sync button on your Orbi router login RBK30 device and the satellite.
6. Firstly, press the sync button on the router, then on satellite within two minutes.
7. When the ring LED shows solid Orbi blue light, the connection between the router and the satellite is good.
8. When the satellite’s ring LED is amber, the connection is fair but requires the satellite to bring a little close to the router.
9. If you see Orbi Pink light on your satellite ring LED, the sync process is unsuccessful and needs to sync again.
10. Move your Orbi satellite to a different location until you see solid Orbi blue light on it.

Change the user login credentials on your Orbi RBK30

• Launch a web browser, like Google Chrome or Safari, on any desktop computer that you have.
• Connect your computer to your Netgear Orbi router login router.
• After that, input www.Orbilogin.com in the address bar of the browser.
• A login window with two empty tabs will appear on your computer.
• It is the Orbi router login It will prompt the user to enter the username and password.
• The default username of your Netgear Orbilogin Router is admin, and the default password is password.
• Username and password are cases of sensitive information, so use them carefully.
• If the default login password of your router does not work, you have to change the Orbi router login credentials.
• In that case, you need to log in with any of your previous customized passwords.
• If all your efforts do not work, you are required to reset the router back to its factory default settings.
• At last, you can go on to set up a new username and password for your Netgear Orbi router login device.
• Next, you have to Click OK to get the Basic homepage of your router.
• Then from the menu bar, select Wireless, and you will be able to see the Network Name (SSID) option in the below section.
• Here, you can type a new username for your Netgear router after removing the previous one.

You can see the Password change (Network Key) option in the security field. Here, type in a new admin/login password for your Netgear router. Then, click the Apply or Save button to save the changes made by you. Once you change the username and the password successfully, you can connect to the Orbi Routerlogin network using the new username and password.