Linksys Wi-Fi Range Extender is a dual-band WIFI extender as it gives an instant boost-up to your home wifi. You can exceed it up to the range of 7500 sq. ft. to acquire the better wifi range and strength to your signal. When we talk about the features and product descriptions, we know about a huge list that cannot get matched with any other range extender available in the market. It has an 802.11 ac process that can give you concurrent dual-band technology.
You can squeeze its speed up to N300 + AC 867 Mbps with both the bands of your range extender. It has introduced the well-known technology called cross-band technology in all its newly launched routers and extenders. The compact and sleek design gives you easy setup and configuration through its spot finder feature. It would not leave any dead zones in your home or apartment. It can work with all types of security encryptions, such as WEP, WPA™, WPA2™, and WPA2™ / WPA™ Mixed Mode.
Linksys extender login using a web browser
You might have a question about what your extender.linksys.com does while setting and configuring your Linksys WiFi extender. The answer to this question is, it takes you to the web-based interface page of your Linksys extender setup. From here, you can implement many settings and configurations. When you install your Linksys extender for the first time, use a secure web browser. Open the browser on your home computer device. And then, go through the address bar by typing www.extender.linksys.com or type the IP address in the form of http://192.168.1.1.
Linksys extender setup techniques
- Plug the newly bought range extender into the wall socket board of your house. Never place your Linksys wifi extender far away from the router you are using.
- Try to place the range extender midway between your router and the device. Or you can place it in between the way from the dead zones of your house to the WIFI router.
- Use a wireless computer, tablet, or laptop to connect your Linksys extender setup process to the linksys.com.
- Fire the web browser and get over to its URL lane. There you should type http://extender.linksys.com and click the Linksys smart wifi login button without any delay.
- Before allowing any further access to your wifi range extender, read the License Agreement. Then click the option for Start setup next to the previous tab.
- In the Next way of your Linksys extender setup process, it will ask you to select the WIFI name of your router. Select the name from the below-disclosed list, and click OK.
- Then without making any delay, enter the Network password and the security passphrase in the needed detail field for the login process of your range extender.
You can see that a suffix will automatically add to your WIFI network that will start as _ext. The users who have to personalize the WIFI settings of their range extender then should set it for both the wireless bands, like 2.4 GHz and 5GHz bands. After selecting the bandwidth and the WIFI settings, type and enter these settings in the authorized fields.
What measures do we need to take to access the Linksys extender login page?
It requires not-so-hard and fast rules to access your Linksys router login page or the access point. You need to pay attention to the below-mentioned steps of your router and do it the same as we have instructed in the below article.
The WIFI name or the SSID you are using in your Linksys extender login process should be the same as your router carry. During the first login process of your wireless Linksys range extender, place the extender close to your existing and working wireless router. The signal obstructions are the most painful hurdles that we need to remove while accessing the access point of your range extender.
Use some alternate locations for the setup and configuration of your Linksys WiFi extender. Keep the router and the Linksys range extender far away from the reach of electromagnetic waves of your household devices. Never keep it with reflective surfaces, such as glass or other glass-made things. The users of WPS should wait patiently till the WPS and the range extender are off.
Know the Linksys smart WiFi setup troubleshooting tips
There may be various causes and reasons that can strike your Linksys wifi router, and then your router will show the error that Linksys Smart wifi setup page is not connecting to the Internet service of the modem. If you face such kind of trouble, then you have to check a few signs on your WIFI system.
- The LED light of the Linksys WIFI router should not be red.
- If you see [off] LED on your device, your extender has an electricity problem.
- The device is unable to locate your WIFI name.
- A message displays on the screen, “Can’t connect to a network.
- If you get the message Linksyssmartwifi is not working or unable to connect to the network.
- My linksyssmartwifi.com login page is not working even after a successful login.
All these are the signs that your router has met with a problem. You need to resolve it quickly. Moreover, there are many internet connectivity problems that we should be aware of. It can be with our computer and LAN ports. It can be with our modem and the WAN ports or the wifi extenders. So better we find a unique solution where the problem exists and the exact solution. Clear the caches of the browser and delete the history. Reset the router to default factory settings.